Blood Pressure Monitor and Transducer BLPR2 can be used for the direct arterial and venous pressure measurement in animal blood vessels. Supplied sterile, BLPR2 is accurate, linear and stable with temperature. May be sterilized cold with Cidex or a similar bactericide. BLPR2 is equipped with a twelve-foot cable and connector compatible with WPI’s four-channel signal conditioning unit, TBM4M Transbridge, and the single-channel BP1 blood pressure monitor. Cable has moisture-resistant locking connector. A continuous, uniform lumen ANIMAL SURGERY & SUPPORT ● Monitors animal arterial or venous blood pressure ● Displays systolic, diastolic or average blood pressure BP1 accepts WPI’s BLPR blood pressure transducer (below) as well as other blood pressure transducers. An audio monitor provides a signal with variable pitch and amplitude, allowing you to hear changes in blood pressure. Digital LCD display provides average or peak signal values from 0 to 1999 mV. With an optional pressure gauge (not provided — see PM015D, page 185), the user may calibrate the display to read mm Hg. Recorder output connector allows direct connection to a pen recorder, oscilloscope or computer via a data acquisition system. Stopcock #14036 included with BLPR2 eliminates places for bubbles to form and lodge. The clear fluid path is easy to inspect. Easy to mount — slotted transducer body accepts Velcro strap. To facilitate setup and operation, a four-way stopcock that allows easy filling, flushing, and zeroing of the transducer is included. Typically, the stopcock is located between the transducer and the animal catheter where it can be used to quickly zero, flush, or de-bubble the transducer. Pressure Monitor (transducer & cable not included) Specify line voltage ACCESSORIES BLPR2 NEW Blood Pressure Transducer & Cable BPCABLE2 NEW Cable (12 ft) with DIN connector for BLPR2 503067 BLPR2 Transducer without cable 13024 Single Rack Mount Kit 13025 Dual Rack Mount Kit 3491 Extension Cable, 5 ft 500184 BNC-to-BNC Cable, 10 ft 14036-15 4-Way Luer Stopcock, Blue Tint (package of 15) KZ1101 Micro Cannula, 3 inch Note: BLPR2 is intended for animal research only and may not be used for human blood pressure measurement. SYS-BP1 ● 0.4mm O.D., 0.2mm I.D. tubing ● Autoclavable ● Biocompatible Perfluorocarbon tubing material Micro Cannula KZ1101 See description on page 120. BP1 SPECIFICATIONS AMPLIFICATION OUTPUT VOLTAGE SWING MAXIMUM OUTPUT CURRENT INPUT IMPEDANCE, EACH INPUT TRANSDUCER APPLIED VOLTS POWER DIMENSIONS SHIPPING WEIGHT x1, x10, x100, variable (x5 to x1000) ± 5 volts 2 mA 100 kΩ || 0.01 µF 10 V nominal, varies with load. 25 mA, maximum 95-135 V or 220-240 V, 50/60 Hz 8.5 x 5.12 x 10 in. (21.6 x 13 x 25.44 cm) 11 lb (5 kg) SHIPPING WEIGHT OVERPRESSURE BLPR2 SPECIFICATIONS WORKING PRESSURE EXCITATION VOLTAGE SENSITIVITY DYNAMIC RESPONSE EIGHT HOUR DRIFT MAXIMUM ERROR -50 to + 300 mm Hg -400 to +4000 mm Hg 1-10 VDC or RMS to 5 kHz 5 µV/V/mm Hg 100 Hz 1 mm Hg after 5 minute warm-up Total combined effects of Sensitivity, Linearity, Hysteresis (at 25°C and 5 µV/V/mm Hg) do not exceed ±2% or 1 mm Hg, whichever is greater. 1 lb 40 UK: Tel: +44 (0)1462 424700 • wpiuk@wpi-europe.com World Precision Instruments www.wpiinc.com Germany: Tel: +49 (0)30-6188845 • wpide@wpi-europe.com US: Tel: 941-371-1003 • sales@wpiinc.com