Two-Syringe Infusion/ Withdrawal Pump SP210iw The SP210iw offers more advanced features than any other infusion/withdrawal pump in its price range— including five operating modes plus independent rate and volume settings for both infusion and withdrawal. ● All features of SP200i ● Independent rate and volume settings for infusion and withdrawal ● Multiple mode selection: infusion, withdrawal, infusion then withdrawal, withdrawal then infusion or continuous cycle. Multi-Syringe Infusion Pump SP220i Ideal for applications requiring multiple syringes, the SP220i is an adaptation of the SP200i and has been modified to hold up to 10 syringes. ● All features of SP200i ● Accommodates 10 syringes up to 10 mL, or six syringes up to 50 mL, or four syringes up to 140 mL. PUMPS, MICROINJECTION Multi-Syringe Infusion/ Withdrawal Pump SP230iw Ideal for applications requiring multiple syringes, the SP230iw is an adaptation of the SP210iw, and has been modified to hold up to 10 syringes. ● All features of SP200iw ● Multiple syringe holder accommodates 10 syringes up to 10 mL, or six syringes up to 50 mL, or four syringes up to 140 mL. Four-Syringe Nanoliter Infusion Pump SP250i Each syringe can be sized differently and is clamped independently. ● Holds four syringes, up to 10 mL each ● Separate clamping accommodates different sizes ● Syringes may be positioned independently for sequential dispensing by the pusher block Four-Syringe Push-Pull Pump SP260p single cycle The SP260p can hold up to four syringes. As two syringes are infusing, two other syringes are withdrawing at the same rate. The SP260p is used for single-cycle applications only. ● All the features of SP200i ● Holds up to 4 syringes Syringe Pump, Infusion (single), 95-135 V Syringe Pump, Infusion (single), 220-240 V Syringe Pump, Microdialysis (double, slow speed), 95-135 V Syringe Pump, Microdialysis (double, slow speed), 220-240 V Syringe Pump, Infusion-Withdrawal (double), 95-135 V Syringe Pump, Infusion-Withdrawal (double), 220-240 V Syringe Pump, Infusion (double), 95-135 V Syringe Pump, Infusion (double), 220-240 V Syringe Pump, Infusion & Withdrawl (Continuous Action), 95-135 V Syringe Pump, Infusion & Withdrawl (Continuous Action), 220-240 V Syringe Pump, Infusion & Withdrawal (double), 95-135 V Syringe Pump, Infusion & Withdrawal (double), 220-240 V Syringe Pump, Infusion (multiple), 95-135 V Syringe Pump, Infusion (multiple), 220-240 V Syringe Pump, Infusion & Withdrawal (multiple), 95-135 V Syringe Pump, Infusion & Withdrawal (multiple), 220-240 V Syringe Pump, Infusion (multiple, mixed volumes), 95-135 V Syringe Pump, Infusion (multiple, mixed volumes), 220-240 V Syringe Pump, Infusion-Withdrawal (double) Single Cycle Action, 95-135 V Syringe Pump, Infusion-Withdrawal (double) Single Cycle Action, 220-240 V All 240-volt pumps are CE-approved. ####-A Audible Alarm (add “A” to pump part number when ordering) ####-P Programmable Ramp Option (SP200 Series) OPTIONAL CABLES 15623 Serial cable, SP Pump-to-IBM 9-pin “D” connector 13685 SP Pump-to-Pump “Daisy-Chain” linking cable, 7 ft 13962 Footswitch for SP200 Series Pumps www.wpiinc.com Germany: Tel: +49 (0)30-6188845 • wpide@wpi-europe.com SP100i SP100iZ SP101i SP101iZ SP120p SP120pZ SP200i SP200iZ SP210c SP210cZ SP210iw SP210iwZ SP220i SP220iZ SP230iw SP230iwZ SP250i SP250iZ SP260p SP260pZ UK: Tel: +44 (0)1462 424700 • wpiuk@wpi-europe.com World Precision Instruments US: Tel: 941-371-1003 • sales@wpiinc.com 167