![](/images/print_header.png)
![SYLG184-TP](/images/content/tiny/sylg184-tp.png)
SYLG184-TP
SYLGARD 184 Silicone Elastomer 5 ml single use burstable sleeve 2/pk
Specially packaged Sylgard184 silicone for quicker and easier application, eliminating the messy procedure of preparing the mixture before application. Supplied is a single use bustable sleeve. Each pack contains 5 ml of Sylgard184.
- Overview
- Specifications
- Accessories
- Citations
- Related Products
Overview
![SYLG184-TP Sylgard Twin-Pack Burstable Sleeve, Single use, 5 ml](/images/content/large/sylg184-tp1.png)
![SYLG184-TP Sylgard Twin-Pack Burstable Sleeve, Single use, 5 ml](/images/content/large/sylg184-tp-hand.png)
![SYLG184-TP Sylgard Twin-Pack Burstable Sleeve, Single use, 5 ml](/images/content/large/sylg184-tp-tip.png)
There are 3 images available to view - click to enlarge and scroll through the product gallery.
SYLG184 Data Sheet
/ Download as PDF
SYLG184 SDS (UK)
/ Download as PDF
- Flowable transparent encapsulant
- Room temperature or heat cure
- Rapid, versatile cure processing controlled by temperature
- Good dielectric properties
- High transparency allows easy inspection of components
Sylgard 184 silicone elastomer base and curing agent is supplied as a two part kit comprised of liquid components. When the base and the curing agent are thoroughly mixed in a 10:1 weight ration, the medium-viscosity liquid mixture has a consistency resembling SAE No. 40 motor oil. The liquid mixture will cure in thick or thin sections to a flexible, transparent elastomer ideally suited for electical/electronic potting and encapsulating applications.
Sylgard 184 silicone elastomer offers a flexible cure schedule from 25-150°C (77-302°F), without an exotherm. Sylgard 184 silicone elastomer requires no post cure and can be placed in service immediately following the completion of the cure schedule at an operating temperature from -55° to 200 °C. (-67 to 392°F).
How to Properly Mix a Burstable Sylgard Twin Pack
The twin pack is a convenient, single use sleeve containing both parts of the adhesive. We will show you how to properly mix the Sylgard Twin Pack.
- First, you will need safety glasses and gloves.
- Starting from the end, roll up the twin pack sleeve, pushing the fluid from the bottom into the top compartment.
- Press down gently to burst seal between the Part A and the Part B compartments.
- Then run the twin pack sleeve back and forth from end to end over the edge of a table at least 50-60 times, or 25 to 30 back and forth cycles, to mix the liquids.
- When the glue is thoroughly mixed, roll up the package from the bottom again and push the glue through the second seal. As you push the glue up, you can dispense it through the nozzle at the top.
- Please consult your local officials for proper disposal of your materials.
Request
Catalogue
Chat
Print