UV-200-02

Overview

• Quality, cost-effective testing in a small package
• Easy to use with simple fixture and load cell changes to accommodate a range of uses
• High-resolution CCD imaging with image-based strain measurement tools (optional)
• Fully featured user interface software for simple, cyclic, relaxation, and multi-modal testing with real-time feedback

The UniVert is ideal for a wide range of mechanical testing applications and its small footprint and affordable price allows users to have testing capabilities when and where they are needed. The easy-to-use software and interchangeable components make the system ideal to use without the need for extensive training or supervision.

The system is capable of tension, compression, and bending testing at forces up to 200N. A wide range of grips and fixtures are available to accommodate different specimens and testing modes.

UniVert S Base Package

The UniVert S base package includes

• UniVert universal uniaxial mechanical tester
• Test control software for PC with real-time results graphing
• 1 load cell (choice of 10, 20, 50, 100, 200 N)
• Max velocity 20mm/s, max cycle frequency 2Hz, max data 100Hz
• Spring/screw closure tension grips with 3 spring stiffnesses
• Compression platens
• Calibration stand (free weight required)
• Webcam imaging system

Options

Specimens & Mounting

Tension Test Specimen: Elastic polymer material	Compression Test Specimen: Inelastic ceramic sphere	Bending Test Specimen: Artificial bone

 

Fluid Bath

The UniVert system can be equipped with an optional temperature-controlled fluid bath to ensure sensitive biomaterials are tested under the appropriate conditions. For tension tests use the UniVert horizontal bath For comporession tests use the UniVert vertical bath

 

Image Analysis Software

The UniVert system can measure specimen strains using integrated non-contact digital image correlation software. The interface software provides simple, cyclic, relaxation, and multi-modal testing with real-time feedback Add the optional scientifice camerat with tracking analysis software to add high-resolution CCD imaging with image-based strain measurements tools.

 

Multiple Axis Testing Upgrade

Shear, twist, and pressure axes can be added to the primary linear test axis to test a wide range of specimens. These actuators and sensors integrate seamlessly with the device controller, software and data output.

To order select the UV-200-03 UniVert+ 3 axis capable upgrade and the axes required

UV-200-03	UniVert universal uniaxial mechanical tester three-axis capable upgrade (requires factory fitting)
UV-200-30S	Shear axis upgrade to the UniVert mechanical test system, includes 1 additional 3-axis load cell (requires factory fitting and UV-200-03)
UV-200-30T	Torsion axis upgrade to the UniVert mechanical test system, includes 1 additional tension/compression/torsion load cell (requires factory fitting and UV-200-03)
UV-200-30P	Pressure axis upgrade to the UniVert mechanical test system, includes 1 pressure sensor (requires factory fitting and UV-200-03)

 

High Performance Upgrade

To upgrade to the S2 high perfomance specification including 5X speed, cycle frequency, and data rate over the UniVert add part number UV-200-02H.

The upgrade improves

• Max Velocity from 20 mm/s to 100 mm/s
• Max Cycle Frequency from 2 Hz to 10 Hz
• Max Data Rate from 100 Hz to 500 Hz

UV-200-02H

UniVert universal uniaxial mechanical tester S2 Performance Upgrade

 

Videos

UniVert S Introduction

UniVert S Demonstration

Specifications

Dimensions	60cm (height) x 30 cm (depth) x 21 cm (width)
Weight	8 Kg
Force Capacity	200 N
Load Cells	0.5 – 200 N
Force Accuracy	0.2% of load cell capacity
Maximum grip separation	300 mm
Maximum Velocity	20 mm/s
Maximum Cycle Frequency	2 Hz
Maximum Data Rate	100 Hz

 

Multiple Axis Testing Upgrade

Shear, twist, and pressure axes can be added to the primary linear test axis to test a wide range of specimens. These actuators and sensors integrate seamlessly with the device controller, software and data output.

To order select the UV-200-03 UniVert+ 3 axis capable upgrade and the axes required

UV-200-03	UniVert universal uniaxial mechanical tester three-axis capable upgrade (requires factory fitting)
UV-200-30S	Shear axis upgrade to the UniVert mechanical test system, includes 1 additional 3-axis load cell (requires factory fitting and UV-200-03)
UV-200-30T	Torsion axis upgrade to the UniVert mechanical test system, includes 1 additional tension/compression/torsion load cell (requires factory fitting and UV-200-03)
UV-200-30P	Pressure axis upgrade to the UniVert mechanical test system, includes 1 pressure sensor (requires factory fitting and UV-200-03)

 

High Performance Upgrade

To upgrade to the S2 high perfomance specification including 5X speed, cycle frequency, and data rate over the UniVert add part number UV-200-02H.

The upgrade improves

• Max Velocity from 20 mm/s to 100 mm/s
• Max Cycle Frequency from 2 Hz to 10 Hz
• Max Data Rate from 100 Hz to 500 Hz

UV-200-02H

UniVert universal uniaxial mechanical tester S2 Performance Upgrade

 

Accessories

Citations

Senem Buyuksungur,Vasif Hasirci,Nesrin Hasirci (2021). 3D printed hybrid bone constructs of PCL and dental pulp stem cells loaded GelMA. Journal of biomedical materials research. Part A vol. 109,12 (2021): 2425-2437. doi:10.1002/jbm.a.37235

Lindsay Barnum,Jacob Quint,Hossein Derakhshandeh,Mohamadmahdi Samandari,Fariba Aghabaglou,Ali Farzin,Laleh Abbasi,Sidi Bencherif,Adnan Memic,Pooria Mostafalu,Ali Tamayol (2021). 3D-Printed Hydrogel-Filled Microneedle Arrays. Advanced healthcare materials vol. 10,13 (2021): e2001922. doi:10.1002/adhm.202001922

Laura K. Rivera-Tarazona,Tarjani Shukla,Kanwar Abhay Singh,Akhilesh K. Gaharwar,Zachary T. Campbell,Taylor H. Ware (2021). 4D Printing of Engineered Living Materials. Advanced Functional Materials, 2021, p. 2106843.

Patricia Comeau,Thomas Willett (2021). A Carbodiimide Coupling Approach for PEGylating GelMA and Further Tuning GelMA Composite Properties. Macromolecular Materials and Engineering 306.2 (2021): 2000604

Francisca M. Acosta, Kennedy K. Howland, Katerina Stojkova, Elizabeth Hernandez, Eric M. Brey, and Christopher R. Rathbone (2021). Adipogenic Differentiation Alters Properties of Vascularized Tissue-Engineered Skeletal Muscle. Tissue Engineering Part A (2021).

Fulufhelo Nemavhola * ORCID logo , Harry M Ngwangwa , Thanyani Pandelani (2021). An Investigation of Uniaxial Mechanical Properties of Excised Sheep Heart Muscle Fibre – Fitting of Different Hyperelastic Constitutive Models. Preprints 2021, 2021080566 (doi: 10.20944/preprints202108.0566.v1).

Ding, Y., Cui, Y., Yang, X. et al. (2021). Anti-RANKL monoclonal antibody and bortezomib prevent mechanical unloading-induced bone loss. Journal of Bone and Mineral Metabolism 39.6 (2021): 974-983.

Gabriele Griffanti, Rayan Fairag, Derek H. Rosenzweig, Lisbet Haglund & Showan N. Nazhat  (2021). Automated biofabrication of anisotropic dense fibrin gels accelerate osteoblastic differentiation of seeded mesenchymal stem cells. Journal of Materials Research (2021): 1-16.

Zachary W. Lipsky, Marisa Patsy, Cláudia N. H. Marques, Guy K. German (2021). Bacterial invasion across the human skin barrier – mechanisms and ensuing tissue degradation. bioRxiv (2021)

Lebea, Lebohang & Ngwangwa, Harry & Pandelani, Thanyani & Nemavhola, Fulufhelo. (2021). Biomechanical behaviour and hyperelastic model parameters identification of sheep omasum. Research Square; 2021. DOI: 10.21203/rs.3.rs-1015547/v1.

Lupe Villegas; James Germann; Susana Marcos (2021). Biomechanical effects of Scleral crosslinking using Rose Bengal/Green-light and Rivoflavin/UVA. Investigative Ophthalmology & Visual Science 62.8 (2021): 2281-2281

Isaak Fischinger, MD, Theo G. Seiler, MD, Jascha Wendelstein, MD, Kristin Tetz, MD, Barbara Fuchs, MD, and Matthias Bolz, MD (2021). Biomechanical Response After Corneal Cross-linking With Riboflavin Dissolved in Dextran Solution Versus Hydroxypropyl Methylcellulose. Journal of Refractive Surgery 37.9 (2021): 631-635.

Morejon Andy, Norberg Christopher D., De Rosa Massimiliano, Best Thomas M., Jackson Alicia R., Travascio Francesco (2021). Compressive Properties and Hydraulic Permeability of Human Meniscus: Relationships With Tissue Structure and Composition. Frontiers in bioengineering and biotechnology (2021): 1559.

Bijal Patel, Bryan T. Wonski, Dan M. Saliganan, Ali Rteil, Loay S. Kabbani & Mai T. Lam  (2021). Decellularized dermis extracellular matrix alloderm mechanically strengthens biological engineered tunica adventitia-based blood vessels. Scientific reports 11.1 (2021): 1-16.

Tidwell, K.; Harriet, S.; Barot, V.; Bauer, A.; Vaughan, M.B.; Hossan, M.R. (2021). Design and Analysis of a Biodegradable Polycaprolactone Flow Diverting Stent for Brain Aneurysms. Bioengineering 8.11 (2021): 183.

Solaleh Miar MS,Gregory R. Dion MD,Sergio Montelongo PhD,Joo L. Ong PhD,Rena Bizios PhD,Teja Guda PhD (2021). Development of a Bioinspired, Self-Adhering, and Drug-Eluting Laryngotracheal Patch. The Laryngoscope 131.9 (2021): 1958-1966.

Kantida Koysombat, Atikah Haneef (2021). Development of Permanent Artificial Bowel Replacement Substrates. bioRxiv (2021).

Valentina Bonito,Suzanne E. Koch,Merle M. Krebber,Daniel A. Carvajal-Berrio,Julia Marzi,Renee Duijvelshoff,Emily B. Lurier,Serena Buscone,Sylvia Dekker,Simone M. J. de Jong,Tristan Mes,Koen R. D. Vaessen,Eva M. Brauchle,Anton W. Bosman,Katja Schenke-Layland,Marianne C. Verhaar,Patricia Y. W. Dankers,Anthal I. P. M. Smits,Carlijn V. C. Bouten (2021). Distinct Effects of Heparin and Interleukin-4 Functionalization on Macrophage Polarization and In Situ Arterial Tissue Regeneration Using Resorbable Supramolecular Vascular Grafts in Rats. Advanced Healthcare Materials 10.21 (2021): 2101103.

Wen Shi1,2, Fang Fang1,3, Yunfan Kong1,2, Sydney E Greer1,4, Mitchell Kuss1,2, Bo Liu1,2, Wen Xue1,2, Xiping Jiang1,4, Paul Lovell5, Aaron M Mohs5,6,7, Andrew T Dudley1,4, Tieshi Li11,8 and Bin Duan (2021). Dynamic hyaluronic acid hydrogel with covalent linked gelatin as an anti-oxidative bioink for cartilage tissue engineering. Biofabrication, Volume 14, Number 1

Solaleh Miar, Joo L. Ong, Rena Bizios, and Teja Guda* (2021). Electrically Stimulated Tunable Drug Delivery From Polypyrrole-Coated Polyvinylidene Fluoride. Frontiers in chemistry vol. 9 599631. 5 Feb. 2021, doi:10.3389/fchem.2021.599631

Alec McCarthy, Kossi Loic M. Avegnon, Phil A. Holubeck, Demi Brown, Anik Karan, Navatha Shree Sharma, Johnson V. John, Shelbie Weihs, Jazmin Ley, Jingwei Xie, (2021). Electrostatic flocking of salt-treated microfibers and nanofiber yarns for regenerative engineering. Materials today. Bio vol. 12 100166. 26 Nov. 2021, doi:10.1016/j.mtbio.2021.100166

Chung-Hao Lee, Yingtao Liu, Marc Moore, Xun Ge & Zahed Siddique  (2021). Enhancement of Stay-at-Home Learning for the Biomechanics Laboratory Course During COVID-19 Pandemic. Biomed Eng Education 1, 149–154 (2021)

Xiaohao Sun, Minfang Chen, Debao Liu, (2021). Fabrication and characterization of few-layer graphene oxide reinforced magnesium matrix composites. Materials Science and Engineering: A 803 (2021): 140722.

Tao Chen,a   Peiling Wei,*a   Guoyin Chen,a   Hongmei Liu,a   Innocent T. Mugaanire,a   Kai Hou ORCID logo *a  and  Meifang Zhu*a   (2021). Heterogeneous structured tough conductive gel fibres for stable and high-performance wearable strain sensors. Journal of Materials Chemistry A 9.20 (2021): 12265-12275.

Justin D. Hochberg, David M. Wirth, Giovanni Spiaggia, Pooja Shah, Barbara Rothen-Rutishauser, Alke Petri-Fink, and Jonathan K. Pokorski* (2021). High-Throughput Manufacturing of Antibacterial Nanofibers by Melt Coextrusion and Post-Processing Surface-Initiated Atom Transfer Radical Polymerization. ACS Applied Polymer Materials (2021).

Burak Derkus  (2021). Human cardiomyocyte-derived exosomes induce cardiac gene expressions in mesenchymal stromal cells within 3D hyaluronic acid hydrogels and in dose-dependent manner. Journal of Materials Science: Materials in Medicine 32.1 (2021): 1-11

Bowen Yao,Shuwang Wu,Ruoxing Wang,Yichen Yan,Anne Cardenas,Dong Wu,Yousif Alsaid,Wenzhuo Wu,Xinyuan Zhu,Ximin He (2021). Hydrogel Ionotronics with Ultra-Low Impedance and High Signal Fidelity across Broad Frequency and Temperature Ranges. Advanced Functional Materials (2021): 2109506.

Kim, S., Regitsky, A.U., Song, J. et al. (2021). In situ mechanical reinforcement of polymer hydrogels via metal-coordinated crosslink mineralization. Nature communications 12.1 (2021): 1-10.

Valentina Palmieri, Benedetta Niccolini, Giordano Perini, Alberto Augello, Flavio De Maio, Jacopo Gervasoni, Aniello Primiano, Giovanni Delogu, Marco De Spirito, Massimiliano Papi, (2021). In situ N-acetylcysteine release from polyvinyl alcohol film for moisture-activated food packaging. Food Packaging and Shelf Life 29 (2021): 100694

Bosworth, L.A.; Doherty, K.G.; Hsuan, J.D.; Cray, S.P.; D’Sa, R.A.; Pineda Molina, C.; Badylak, S.F.; Williams, R.L. (2021). Material Characterisation and Stratification of Conjunctival Epithelial Cells on Electrospun Poly(ε-Caprolactone) Fibres Loaded with Decellularised Tissue Matrices. Pharmaceutics 13.3 (2021): 318.

Gülçin Günal, Meltem Okan, Dincer Gokcen, Tuncer Caykara, and Halil Murat Aydin (2021). Microwave-Assisted Synthesis of Stretchable and Transparent Poly(Ethyleneglycol-Sebacate) Elastomers with Autonomous Self-Healing and Capacitive Properties. Soft Robotics 8.3 (2021): 262-272.

Changmin Shao, Junjie Chi, Zhuoyue Chen, Lingyu Sun, Luoran Shang, Yuanjin Zhao, Fangfu Ye, (2021). Nano-imprinted anisotropic structural color graphene films for cardiomyocytes dynamic displaying. Materials Today 51 (2021): 117-125

Thais Sousa, Nilabh Kajave, Pengfei Dong, Linxia Gu, Stephanie Florczyk, and Vipuil Kishore (2021). Optimization of Freeze-FRESH Methodology for 3D Printing of Microporous Collagen Constructs. 3D Printing and Additive Manufacturing (2021).

Menekse Ermis  (2021). Photo-crosslinked gelatin methacrylate hydrogels with mesenchymal stem cell and endothelial cell spheroids as soft tissue substitutes. Journal of Materials Research 36.1 (2021): 176-190.

Shuwang Wu,Mutian Hua,Yousif Alsaid,Yingjie Du,Yanfei Ma,Yusen Zhao,Chiao-Yueh Lo,Canran Wang,Dong Wu,Bowen Yao,Joseph Strzalka,Hua Zhou,Xinyuan Zhu,Ximin He (2021). Poly(vinyl alcohol) Hydrogels with Broad-Range Tunable Mechanical Properties via the Hofmeister Effect. Advanced Materials 33.11 (2021): 2007829

Shuwang Wu,Yousif Alsaid,Bowen Yao,Yichen Yan,Yusen Zhao,Mutian Hua,Dong Wu,Xinyuan Zhu,Ximin He (2021). Rapid and scalable fabrication of ultra-stretchable, anti-freezing conductive gels by cononsolvency effect. EcoMat 3.2 (2021): e12085

Christoff-Tempesta, T., Cho, Y., Kim, DY. et al.  (2021). Self-assembly of aramid amphiphiles into ultra-stable nanoribbons and aligned nanoribbon threads. Nature Nanotechnology 16.4 (2021): 447-454.

Meng Gao, Hanxiang Wu, Roshan Plamthottam, Zhixin Xie, Ying Liu, Junhui Hu, Shuwang Wu, Lily Wu, Ximin He, Qibing Pei, (2021). Skin temperature-triggered, debonding-on-demand sticker for a self-powered mechanosensitive communication system. Matter 4.6 (2021): 1962-1974

Zhao, Yusen & Lo, Chiao-Yueh & Ruan, Lecheng & Pi, Chen-Huan & Kim, Cheolgyu & Alsaid, Yousif & Frenkel, Imri & Rico, Rossana & Tsao, Tsu-Chin & He, Ximin. (2021). Somatosensory actuator based on stretchable conductive photothermally responsive hydrogel. Science Robotics 6.53 (2021): eabd5483

Electrostatic flocking of salt-treated microfibers and nanofiber yarns for regenerative engineering, (2021). Strong tough hydrogels via the synergy of freeze-casting and salting out. Nature 590.7847 (2021): 594-599.

Joseph M. Palomba, David M. Wirth, Jin Yeong Kim, Mark Kalaj, Evan M. Clarke, Gregory W. Peterson, Jonathan K. Pokorski, and Seth M. Cohen (2021). Strong, Ductile MOF–Poly(urethane urea) Composites. Chemistry of Materials 33.9 (2021): 3164-3171.

Sidi Duan, Shuwang Wu, Mutian Hua, Dong Wu, Yichen Yan, Xinyuan Zhu, Ximin He, (2021). Tendon-inspired anti-freezing tough gels. Iscience 24.9 (2021): 102989

John G.McMorrana Diane E.Gregoryab (2021). The effect of compressive loading rate on annulus fibrosus strength following endplate fracture. Medical Engineering & Physics (2021)

Rudzani Sigwadi * , Touhami Mokrani , Phumlani Msomi ORCID logo , Fulufhelo Nemavhola ORCID logo (2021). The Effect of Sulfated Zirconia and Zirconium Phosphate Nanocomposite Membranes on Fuel Cell Efficiency. Polymers 2022, 14, 263.

Han, P.; Vaquette, C.; Abdal-hay, A.; Ivanovski, S. (2021). The Mechanosensing and Global DNA Methylation of Human Osteoblasts on MEW Fibers. Nanomaterials 11.11 (2021): 2943.

T.B. Wissing, K. Van der Heiden, S.M. Serra, A.I.P.M. Smits, C.V.C. Bouten, F.J.H. Gijsen (2021). Tissue-engineered collagenous fibrous cap models to systematically elucidate atherosclerotic plaque rupture. bioRxiv (2021)

Khandaker, M.; Progri, H.; Arasu, D.T.; Nikfarjam, S.; Shamim, N.  (2021). Use of Polycaprolactone Electrospun Nanofiber Mesh in a Face Mask. Materials 14.15 (2021): 4272.

Comeau, P. and Willett, T. (2020).  A Carbodiimide Coupling Approach for PEGylating GelMA and Further Tuning GelMA Composite Properties.  Macromolecular Materials and Engineering. 306. 2000604. 10.1002/mame.202000604.

Snider, E.J., Cornell, L.E., Acevedo, J.M., Gross, B., Edsall, P.R., Lund, B.J. and Zamora, D.O. (2020).  Development and characterization of a Benchtop corneal puncture injury Model. Scientific reports vol. 10,1 4218. 6 Mar. 2020, doi:10.1038/s41598-020-61079-y

Jiang, X., Wu, S., Kuss, M., Kong, Y., Shi, W., Streubel, P.N., Li, T. and Duan, B. (2020). 3D printing of multilayered scaffolds for rotator cuff tendon regeneration. Bioactive materials vol. 5,3 636-643. 7 May. 2020, doi:10.1016/j.bioactmat.2020.04.017

Hua, M., Wu, D., Wu, S., Ma, Y., Alsaid, Y. and He, X. (2020). 4D Printable Tough and Thermoresponsive Hydrogels. ACS applied materials & interfaces vol. 13,11 (2021): 12689-12697. doi:10.1021/acsami.0c17532

Currie, H.A., Martin, N.F., Garcia, G.E., Davis, F.M. and Kemp, P.S. (2020). A mechanical approach to understanding the impact of the nematode Anguillicoloides crassus on the European eel swimbladder. The Journal of experimental biology vol. 223,Pt 17 jeb219808. 1 Sep. 2020, doi:10.1242/jeb.219808

H. Derakhshandeh, D. Aghabaglou, A. McCarthy, A. Mostafavi, C. Wiseman, Z. Bonick, I. Ghanavati, S. Harris, C. Kreikemeier-Bower, S. Basri, J. Rosenbohm, R. Yang, P. Mostafalu, D. Orgill, A. Tamayol (2020). A Wirelessly Controlled Smart Bandage with 3D-Printed Miniaturized Needle Arrays. Advanced functional materials vol. 30,13 (2020): 1905544. doi:10.1002/adfm.201905544

Mondal, D., Srinivasan, A., Comeau, P., Toh, Y.C. and Willett, T.L. (2020). Acrylated epoxidized soybean oil/hydroxyapatite-based nanocomposite scaffolds prepared by additive manufacturing for bone tissue engineering. Materials science & engineering. C, Materials for biological applications vol. 118 (2021): 111400. doi:10.1016/j.msec.2020.111400

Wu, S., Kumar, V., Xiao, P., Kuss, M., Lim, J.Y., Guda, C., Butcher, J. and Duan, B. (2020). Age related extracellular matrix and interstitial cell phenotype in pulmonary valves. Scientific reports vol. 10,1 21338. 7 Dec. 2020, doi:10.1038/s41598-020-78507-8

Parfenov, V.A., Koudan, E.V., Krokhmal, A.A., Annenkova, E.A., Petrov, S.V., Pereira, F.D., Karalkin, P.A., Nezhurina, E.K., Gryadunova, A.A., Bulanova, E.A. and Sapozhnikov, O.A. (2020). Biofabrication of a Functional Tubular Construct from Tissue Spheroids Using Magnetoacoustic Levitational Directed Assembly. Advanced healthcare materials vol. 9,24 (2020): e2000721. doi:10.1002/adhm.202000721

Ma, Y., Hua, M., Wu, S., Du, Y., Pei, X., Zhu, X., Zhou, F. and He, X. (2020). Bioinspired high-power-density strong contractile hydrogel by programmable elastic recoil. Science advances vol. 6,47 eabd2520. 18 Nov. 2020, doi:10.1126/sciadv.abd2520

Bektas, C.K. and Hasirci, V. (2020). Cell loaded 3D bioprinted GelMA hydrogels for corneal stroma engineering. Biomaterials science vol. 8,1 (2019): 438-449. doi:10.1039/c9bm01236b

Rad, R.M., Alshemary, A.Z., Evis, Z., Keskin, D. and Tezcaner, A. (2020). Cellulose acetate-gelatin coated boron-bioactive glass biocomposite scaffolds for bone tissue engineering. Biomedical materials (Bristol, England) vol. 15,6 065009. 24 Sep. 2020, doi:10.1088/1748-605X/ab8d47

Palomino-Durand, C., Lopez, M., Marchandise, P., Martel, B., Blanchemain, N. and Chai, F. (2020). Chitosan/Polycyclodextrin (CHT/PCD)-Based Sponges Delivering VEGF to Enhance Angiogenesis for Bone Regeneration. Pharmaceutics vol. 12,9 784. 19 Aug. 2020, doi:10.3390/pharmaceutics12090784

Patel, B., Saliganan, D., Rteil, A., Kabbani, L. and Lam, M. (2020). Decellularized Dermis Extracellular Matrix Alloderm as a Scaffold for Biological Engineered Blood Vessels. Scientific reports vol. 11,1 11384. 31 May. 2021, doi:10.1038/s41598-021-91005-9

Amiel, A.G., Palomino-Durand, C., Maton, M., Lopez, M., Cazaux, F., Chai, F., Neut, C., Foligné, B., Martel, B. and Blanchemain, N. (2020). Designed sponges based on chitosan and cyclodextrin polymer for a local release of ciprofloxacin in diabetic foot infections. International journal of pharmaceutics vol. 587 (2020): 119677. doi:10.1016/j.ijpharm.2020.119677

E. Snider, L. Cornell, J. Acevedo, B. Gross, P. Edsall, B. Lund, D. Zamora (2020). Development and Characterization of a Benchtop Corneal Puncture Injury Model. Development and Characterization of a Benchtop Corneal Puncture Injury Model

Acosta, F.M., Jia, U.T.A., Stojkova, K., Howland, K.K., Guda, T., Pacelli, S., Brey, E.M. and Rathbone, C.R. (2020). Diabetic Conditions Confer Metabolic and Structural Modifications to Tissue-Engineered Skeletal Muscle. Diabetic Conditions Confer Metabolic and Structural Modifications to Tissue-Engineered Skeletal Muscle.

Fathi-Achachelouei, M., Keskin, D., Bat, E., Vrana, N.E. and Tezcaner, A. (2020). Dual growth factor delivery using PLGA nanoparticles in silk fibroin/PEGDMA hydrogels for articular cartilage tissue engineering. Journal of biomedical materials research. Part B, Applied biomaterials vol. 108,5 (2020): 2041-2062. doi:10.1002/jbm.b.34544

Guner, M.B., Dalgic, A.D., Tezcaner, A., Yilanci, S. and Keskin, D. (2020). Dual phase scaffold produced by rotary jet spinning and electrospinning for tendon tissue engineering. Biomedical Materials. Biomedical materials (Bristol, England) vol. 15,6 065014. 3 Oct. 2020, doi:10.1088/1748-605X/ab9550

Brown, M.S., Mendoza, M., Chavoshnejad, P., Razavi, M.J., Mahler, G.J. and Koh, A. (2020). Electronic-ECM: A Permeable Microporous Elastomer for an Advanced Bio-Integrated Continuous Sensing Platform. Advanced Materials Technologies. 5. 2000242. 10.1002/admt.202000242.

Jan, L., Maria, L., Niklas, P., Isaak, F., Christina, H. and Gerald, S. (2020). Endothelial Safety and Efficacy of ex-vivo Collagen Cross Linking (CXL) of Human Corneal Transplants. American journal of ophthalmology vol. 214 (2020): 127-133. doi:10.1016/j.ajo.2020.02.024

Lee, C.H., Liu, Y., Moore, M., Ge, X. and Siddique, Z (2020). Enhancement of Stay-at-Home Learning for the Biomechanics Laboratory Course During COVID-19 Pandemic. Biomed Eng Education 1, 149–154 (2021). https://doi.org/10.1007/s43683-020-00025-w

Zhang, J., Wu, C., Xu, Y., Chen, J., Ning, N., Yang, Z., Guo, Y., Hu, X. and Wang, Y. (2020). Highly Stretchable and Conductive Self-Healing Hydrogels for Temperature and Strain Sensing and Chronic Wound Treatment.  ACS applied materials & interfaces vol. 12,37 (2020): 40990-40999. doi:10.1021/acsami.0c08291

van Haaften, E.E., Wissing, T.B., Kurniawan, N.A., Smits, A.I. and Bouten, C.V. (2020). Human In Vitro Model Mimicking Material-Driven Vascular Regeneration Reveals How Cyclic Stretch and Shear Stress Differentially Modulate Inflammation and Matrix Deposition. Advanced biosystems vol. 4,6 (2020): e1900249. doi:10.1002/adbi.201900249

He, Q., Laurence, D.W., Lee, C.H. and Chen, J.S. (2020). Manifold learning based data-driven modeling for soft biological tissues. Journal of biomechanics vol. 117 (2021): 110124. doi:10.1016/j.jbiomech.2020.110124

Dhandapani, N., Samuelsson, K., Sköld, M., Zohrevand, K. and German, G.K (2020). Mechanical, compositional, and microstructural changes caused by human skin maceration. Extreme Mechanics Letters, Volume 41, 2020, 101017, ISSN 2352-4316, https://doi.org/10.1016/j.eml.2020.101017.

G. Isik, N. Hasirci, A. Tezcaner, A. Kiziltay (2020). Multifunctional periodontal membrane for treatment and regeneration purposes. Journal of Bioactive and Compatible Polymers. 2020;35(2):117-138. doi:10.1177/0883911520911659

Curatolo, A., Birkenfeld, J.S., Martinez-Enriquez, E., Germann, J.A., Muralidharan, G., Palací, J., Pascual, D., Eliasy, A., Abass, A., Solarski, J. and Karnowski, K. (2020). Multi-meridian corneal imaging of air-puff induced deformation for improved detection of biomechanical abnormalities. Biomedical optics express vol. 11,11 6337-6355. 14 Oct. 2020, doi:10.1364/BOE.402402

Liang, N., Flynn, L.E. and Gillies, E.R. (2020). Neutral, water-soluble poly (ester amide) hydrogels for cell encapsulation. European Polymer Journal, Volume 136, 2020, 109899, ISSN 0014-3057, https://doi.org/10.1016/j.eurpolymj.2020.109899.

McCormick, R., Pearce, I., Kaye, S. and Haneef, A. (2020). Optimisation of a Novel Bio-Substrate as a Treatment for Atrophic Age-Related Macular Degeneration.  Frontiers in bioengineering and biotechnology vol. 8 456. 15 May. 2020, doi:10.3389/fbioe.2020.00456

Modulevsky, D.J., Cuerrier, C.M., Leblanc-Latour, M., Hickey, R.J., Obhi, R.J.K., Shore, I., Galuta, A., Walker, K.L., Tsai, E.C. and Pelling, A.E. (2020). Plant Scaffolds Support Motor Recovery and Regeneration in Rat Spinal Cord Injury. bioRxiv 2020.10.21.347807; doi: https://doi.org/10.1101/2020.10.21.347807

O’Connor, N.A., Syed, A., Wong, M., Hicks, J., Nunez, G., Jitianu, A., Siler, Z. and Peterson, M. (2020). Polydopamine Antioxidant Hydrogels for Wound Healing Applications. Gels (Basel, Switzerland) vol. 6,4 39. 31 Oct. 2020, doi:10.3390/gels6040039

Gopi, S., Ramsay, B.A., Ramsay, J.A. and Kontopoulou, M. (2020). Preparation, Characterization and Processing of PCL/PHO Blends by 3D Bioplotting. International Polymer Processing Journal of the Polymer Processing Society 35(5):458-470

Gerdes, S., Mostafavi, A., Ramesh, S., Memic, A., Rivero, I.V., Rao, P. and Tamayol, A. (2020). Process–Structure–Quality Relationships of Three-Dimensional Printed Poly (Caprolactone)-Hydroxyapatite Scaffolds. Tissue engineering. Part A vol. 26,5-6 (2020): 279-291. doi:10.1089/ten.TEA.2019.0237

Aldosary, G., Tse, T., Arnaout, A., Caudrelier, J.M., Czyrnyj, C., Romain, R., McLean, L., Foottit, C., Belec, J. and Vandervoort, E. (2020). Radiological, dosimetric and mechanical properties of a deformable breast phantom for radiation therapy and surgical applications. Biomedical physics & engineering express vol. 6,3 035028. 24 Apr. 2020, doi:10.1088/2057-1976/ab834a

Griffanti, G., Rezabeigi, E., Li, J., Murshed, M. and Nazhat, S.N. (2020). Rapid biofabrication of printable dense collagen bioinks of tunable properties. Advanced Functional Materials. 30. 1903874. 10.1002/adfm.201903874.

Ghelani, R.N., Zwambag, D.P. and Gregory, D.E. (2020). Rapid increase in intradiscal pressure in porcine cervical spine units negatively impacts annulus fibrosus strength. Journal of biomechanics vol. 108 (2020): 109888. doi:10.1016/j.jbiomech.2020.109888

Gholizadeh, S., Allahyari, Z., Carter, R., Delgadillo, L., Blaquiere, M., Nouguier-Morin, F., Marchi, N. and Gaborski, T.R. (2020). Robust and Gradient Thickness Porous Membranes for In Vitro Modeling of Physiological Barriers. Advanced materials technologies vol. 5,12 (2020): 2000474. doi:10.1002/admt.202000474

Lopez, L.I.V., Bronte, D., Germann, J. and Marcos, S., (2020). Scleral cross-linking using Rose Bengal-Green Light. Villegas, Lupe. (2020). Scleral cross-linking using Rose Bengal-Green Light.

Wang, X., Muñiz-Lerma, J.A., Sanchez-Mata, O., Atabay, S.E., Shandiz, M.A. and Brochu, M. (2020). Single-crystalline-like stainless steel 316L with different geometries fabricated by laser powder bed fusion. Progress in Additive Manufacturing. 5. 10.1007/s40964-020-00123-9.

Ho, Q.B. and Kontopoulou, M. (2020). Stabilization of the cellular structure of polypropylene foams and secondary nucleation mechanism in the presence of graphene nanoplatelets. Polymer, Volume 198, 2020, 122506, ISSN 0032-3861, https://doi.org/10.1016/j.polymer.2020.122506.

Inoue, A., Yuk, H., Lu, B. and Zhao, X. (2020). Strong adhesion of wet conducting polymers on diverse substrates. Science advances vol. 6,12 eaay5394. 20 Mar. 2020, doi:10.1126/sciadv.aay5394

Luo, Y., Humayun, A. and Mills, D.K (2020). Surface Modification of 3D Printed PLA/Halloysite Composite Scaffolds with Antibacterial and Osteogenic Capabilities.  Applied Sciences. 10. 3971. 10.3390/app10113971.

Ramesh, S., Kovelakuntla, V., Meyer, A.S. and Rivero, I.V. (2020). Three-dimensional printing of stimuli-responsive hydrogel with antibacterial activity. Bioprinting. 24. e00106. 10.1016/j.bprint.2020.e00106.

Duijvelshoff, R., Cabrera, M.S., Sanders, B., Dekker, S., Smits, A.I., Baaijens, F.P. and Bouten, C.V. (2020). Transcatheter-Delivered Expandable Bioresorbable Polymeric Graft With Stenting Capacity Induces Vascular Regeneration. JACC. Basic to translational science vol. 5,11 1095-1110. 23 Nov. 2020, doi:10.1016/j.jacbts.2020.09.005

Smith, K.J., Mathur, M., Meador, W.D., Phillips-Garcia, B., Sugerman, G.P., Menta, A.K., Jazwiec, T., Malinowski, M., Timek, T.A. and Rausch, M.K. (2020). Tricuspid Chordae Tendineae Mechanics: Insertion Site, Leaflet, and Size-Specific Analysis and Constitutive Modelling. Experimental Mechanics. 61. 10.1007/s11340-020-00594-5.

Comeau, P.A. and Willett, T.L. (2020). Triethyleneglycol dimethacrylate addition improves the 3D-printability and construct properties of a GelMA-nHA composite system towards tissue engineering applications.  Materials science & engineering. C, Materials for biological applications vol. 112 (2020): 110937. doi:10.1016/j.msec.2020.110937

Luo, Y., Humayun, A. and Mills, D. (2020). Zinc Doped Halloysite Cooperating with Polylactic Acid for Bone Regeneration. 10.20944/preprints202005.0165.v1.

Portillo-Esquivel, L.E., Nanduri, V., Zhang, F., Liang, W. and Zhang, B. (2020). z-Wire: A Microscaffold That Supports Guided Tissue Assembly and Intramyocardium Delivery for Cardiac Repair. Advanced healthcare materials vol. 9,14 (2020): e2000358. doi:10.1002/adhm.202000358

G. Bahcecioglu, N. Hasirci, B. Bilgen, V. Hasirci (2019). A 3d Printed Pcl/Hydrogel Construct With Zone-Specific Biochemical Composition Mimicking That Of The Meniscus. Biofabrication vol. 11,2 025002. 16 Jan. 2019, doi:10.1088/1758-5090/aaf707

S. Freeman, R. Ramos, P. Chando, L. Zhou, K. Reeser, S. Jin, P. Soman, K. Ye (2019). A Bioink Blend for Rotary 3D Bioprinting Tissue Engineered Small-Diameter Vascular Constructs. Acta biomaterialia vol. 95 (2019): 152-164. doi:10.1016/j.actbio.2019.06.052

H. A. Alam, A. D. Dalgic, A. Tezcaner, C. Ozen, D. Keskin (2019). A Comparative Study Of Monoaxial And Coaxial Pcl/Gelatin/Poloxamer 188 Scaffolds For Bone Tissue Engineering. International Journal of Polymeric Materials and Polymeric Biomaterials. 69. 1-12. 10.1080/00914037.2019.1581198.

H. Derakhshandeh (2019). A Smart Bandage Equipped with Miniaturized Needle Arrays and Wirelessly-Controlled Drug Delivery System for the Treatment of Chronic Wounds.

P. Comeau, T. Willett (2019). An Alternative Approach to the Surface Methacrylation of Non-stoichiometric Hydroxyapatite Nanoparticles for Use in Bone-Inspired Composites. Frontiers in Materials, 6, 263 ISSN=2296-8016  

G. Bahcecioglu, N. Hasirci, B. Bilgen, V. Hasirci (2019). Anatomical Meniscus Construct with Zone Specific Biochemical Composition and Structural Organization. Biomaterials vol. 218 (2019): 119361. doi:10.1016/j.biomaterials.2019.119361

S. Lin, X. Liu, J. Liu, H. Yuk, H. C. Loh, G. A. Parada, C. Settens, J. Song, A. Masic, G. H. McKinley, X. Zhao (2019). Anti-Fatigue-Fracture Hydrogels. Science advances vol. 5,1 eaau8528. 25 Jan. 2019, doi:10.1126/sciadv.aau8528

X. Wang, J.A. Muniz-Lerma, O. Sanchez-Mata, M.A. Shandiz, N. Brodusch, R. Gauvin, M. Brochu (2019). Characterization Of Single Crystalline Austenitic Stainless Steel Thin Struts Processed By Laser Powder Bed Fusion. Scripta Materialia, Volume 163, 2019, Pages 51-56, ISSN 1359-6462, https://doi.org/10.1016/j.scriptamat.2018.12.032.

D. Wirth, J. Pokorski (2019). Design and fabrication of a low-cost pilot-scale melt-processing system. Polymer, Volume 181, 2019, 121802, ISSN 0032-3861, https://doi.org/10.1016/j.polymer.2019.121802.

N. Sharma (2019). Design of cell-instructiv Design of cell-instructive biomaterial scaffolds for inter e biomaterial scaffolds for intervertebral disc regeneration. Electronic Thesis and Dissertation Repository. 6612. https://ir.lib.uwo.ca/etd/6612

R. M. Rad, D. Atila, Z. Evis, D. Keskin, A. Tezcaner (2019). Development of a Novel Functionally Graded Membrane Containing Boron Modified Bioactive Glass Nanoparticles for Guided Bone Regeneration. Journal of tissue engineering and regenerative medicine vol. 13,8 (2019): 1331-1345. doi:10.1002/term.2877

A. Prince (2019). Development of in-situ Forming Hydrogels for Intra-articular Drug Delivery.

D. A. Prince, I. J. Villamagna, C. C. Hopkins, J. R. de Bruyn, E. R. Gillies (2019). Effect Of Drug Loading On The Properties Of Temperature-Responsive Polyester-Poly(Ethylene Glycol)-Polyester Hydrogels. Polymer International. 68. 10.1002/pi.5797.

R. Sigwadi, F. Nemavhola, M. Dhlamini, T. Mokrani (2019). Enhancing the Mechanical Properties of Zirconia/Nafion® Nanocomposite Membrane through Carbon Nanotubes for Fuel Cell Application. Heliyon vol. 5,7 e02112. 25 Jul. 2019, doi:10.1016/j.heliyon.2019.e02112

R. M. Rad, D. Atila, E. E. Akgun, Z. Evis, D. Keskin, A. Tezcaner (2019). Evaluation Of Human Dental Pulp Stem Cells Behavior On A Novel Nanobiocomposite Scaffold Prepared For Regenerative Endodontics. Materials science & engineering. C, Materials for biological applications vol. 100 (2019): 928-948. doi:10.1016/j.msec.2019.03.022

A. Cullen, A. Price (2019). Fabrication of 3D Conjugated Polymer Structures via Vat Polymerization Additive Manufacturing. Smart Materials and Structures. 28. 10.1088/1361-665X/ab35f1.

Li, Y., Guo, F., Hao, Y., Gupta, S.K., Hu, J., Wang, Y., Wang, N., Zhao, Y. and Guo, M. (2019). Helical nanofiber yarn enabling highly stretchable engineered microtissue. Proceedings of the National Academy of Sciences of the United States of America vol. 116,19 (2019): 9245-9250. doi:10.1073/pnas.1821617116

M. Uyaniklar, G. Günal, A. Tevlek, P. Hosseinian, H. Aydin (2019). Hybrid Cornea: Cell Laden Hydrogel Incorporated Decellularized Matrix. ACS biomaterials science & engineering vol. 6,1 (2020): 122-133. doi:10.1021/acsbiomaterials.9b01286

J. Ortiz Ortiz, G. Carbajal de la Torre, M. Villagomez Galindo, M. Antonio Espinosa Medina, H. Aguilar Rodriguez (2019). Hyperelastic characterization of synthetic mesh for abdominal wall hernia repair. MRS Advances, vol. 4, no. 57-58, 2019, pp. 3181–3185., doi:10.1557/adv.2019.399.

Liu, X., Steiger, C., Lin, S., Parada, G.A., Liu, J., Chan, H.F., Yuk, H., Phan, N.V., Collins, J., Tamang, S. and Traverso, G. (2019). Ingestible hydrogel device. Nature communications vol. 10,1 493. 30 Jan. 2019, doi:10.1038/s41467-019-08355-2

Shridhar, A., Amsden, B.G., Gillies, E.R. and Flynn, L.E. (2019). Investigating the effects of tissue-specific extracellular matrix on the adipogenic and osteogenic differentiation of human adipose-derived stromal cells within composite hydrogel scaffolds. Frontiers in bioengineering and biotechnology vol. 7 402. 11 Dec. 2019, doi:10.3389/fbioe.2019.00402

S. Qiu (2019). Materials and Processing for Wearable Healthcare Electronics Systems: Flexible Circuit Boards and Stretchable e-Textile Patches for Surface Electromyography.

S. Lin, J. Liu, X. Liu, X. Zhao (2019). Muscle-like Fatigue-Resistant Hydrogels by Mechanical Training. Proceedings of the National Academy of Sciences of the United States of America vol. 116,21 (2019): 10244-10249. doi:10.1073/pnas.1903019116

N. Marins, B. Lee, R. Silva, A. Raghavan, N. Carreno, K. Grandfield (2019). Niobium Pentoxide and Hydroxyapatite Particle Loaded Electrospun Polycaprolactone/Gelatin Membranes for Bone Tissue Engineering. Colloids and surfaces. B, Biointerfaces vol. 182 (2019): 110386. doi:10.1016/j.colsurfb.2019.110386

I. J. Villamagna, T. N. Gordon, M. B. Hurtig, F. Beier, E. R. Gillies (2019). Poly(Ester Amide) Particles For Controlled Delivery Of Celecoxib. Journal of biomedical materials research. Part A vol. 107,6 (2019): 1235-1243. doi:10.1002/jbm.a.36632

S. Miar, C. Perez, J. Ong, T. Guda (2019). Polyvinyl Alcohol-Poly Acrylic Acid Bilayer Oral Drug Delivery Systems: A Comparison Between Thin Films and Inverse Double Network Bilayers. Journal of biomaterials applications vol. 34,4 (2019): 523-532. doi:10.1177/0885328219861614

F. Nemavhola, R. Sigwadi (2019). Prediction of Hyperelastic Material Properties of Nafion117 and Nafion/ZrO2 Nano-Composite Membrane. International Journal of Automotive and Mechanical Engineering, 16(2), 6524–6540. https://doi.org/10.15282/ijame.16.2.2019.5.0492

E. Malikmammadov, T. E. Tanir, A. Kiziltay, N. Hasirci (2019). Preparation And Characterization Of Poly (Ε-Caprolactone) Scaffolds Modified With Cell-Loaded Fibrin Gel. International journal of biological macromolecules vol. 125 (2019): 683-689. doi:10.1016/j.ijbiomac.2018.12.036

P. Comeau, T. Willett (2019). Printability of Methacrylated Gelatin upon Inclusion of a Chloride Salt and Hydroxyapatite Nano-Particles. Macromolecular Materials and Engineering. 304. 10.1002/mame.201900142.

B. Lu, H. Yuk, S. Lin, N. Jian, K. Qu, J. Xu, X. Zhao (2019). Pure PEDOT: PSS Hydrogels. Nature communications vol. 10,1 1043. 5 Mar. 2019, doi:10.1038/s41467-019-09003-5

A. Walker, J. Kim, J. Wyatt, A. Terlouw, K. Balachandran, J. Wolchok (2019). Repeated In Vitro Impact Conditioning Of Astrocytes Decreases The Expression And Accumulation Of Extracellular Matrix. Annals of biomedical engineering vol. 47,4 (2019): 967-979. doi:10.1007/s10439-019-02219-y

K. Guzman-Diaz, A. Alvarado-Gonzalez, D. Herrera, A. Hernandez-Reynoso, S. Rodriguez-Reynoso, A. Garcia-Gonzalez (2019). Surface Representation of the Urinary Bladder and Bio-mechanical Analysis by Linear Dynamic Model. In book: VIII Latin American Conference on Biomedical Engineering and XLII National Conference on Biomedical Engineering (pp.945-949)

"Y. Liang (2019). Synthesis of Crosslinkable Poly(ester amide)s for Cell Encapsulation and Delivery. Electronic Thesis and Dissertation Repository. 6539. https://ir.lib.uwo.ca/etd/6539

"

M. Harvey-Burgess, D. Gregory (2019). The Effect of Axial Torsion on the Mechanical Properties of the Annulus Fibrosus. Spine vol. 44,4 (2019): E195-E201. doi:10.1097/BRS.0000000000002803

Y. Luo, D. Mills (2019). The Effect of Halloysite Addition on the Material Properties of Chitosan–Halloysite Hydrogel Composites. Gels (Basel, Switzerland) vol. 5,3 40. 14 Aug. 2019, doi:10.3390/gels5030040

R. Sigwadi, M. Dhlamini, T. Mokrani, F. Nemovhola, P. Nonjola, P. Msomi (2019). The proton conductivity and mechanical properties of Nafion®/ ZrP nanocomposite membrane. Heliyon vol. 5,8 e02240. 27 Aug. 2019, doi:10.1016/j.heliyon.2019.e02240

Charaya, H., La, T.G., Rieger, J. and Chung, H.J. (2019). Thermochromic and Piezocapacitive Flexible Sensor Array by Combining Composite Elastomer Dielectrics and Transparent Ionic Hydrogel Electrodes. Advanced Materials Technologies. 4. 10.1002/admt.201900327.

S. Lin (2019). Tissue-like Hydrogels by Design.

Z. Lipsky, G. German (2019). Ultraviolet Light Degrades the Mechanical and Structural Properties of Human Stratum Corneum. Journal of the mechanical behavior of biomedical materials vol. 100 (2019): 103391. doi:10.1016/j.jmbbm.2019.103391

T.D. Usal, D. Yucel, V. Hasirci (2018). A Novel Gelma-Phema Hydrogel Nerve Guide For The Treatment Of Peripheral Nerve Damages. International journal of biological macromolecules vol. 121 (2019): 699-706. doi:10.1016/j.ijbiomac.2018.10.060

Nemavhola, F., Dhlamini, S., Sigwadi, R. and Mokrani, T. (2018). Effect of relative humidity on mechanical strength of zirconia/Nafion® Nano-composite membrane. Journal of Computational and Applied Research in Mechanical Engineering. 7. 175-187. 10.22061/jcarme.2017.2484.1239.

S. Tukkan, D. Atila, A. Akdaq, A. Tezcaner (2018). Fabrication Of Functionalized Citrus Pectin/Silk Fibroin Scaffolds For Skin Tissue Engineering. Journal of biomedical materials research. Part B, Applied biomaterials vol. 106,7 (2018): 2625-2635. doi:10.1002/jbm.b.34079

G. Griffanti, M. James-Bhasin, I. Donelli, G. Freddi, S.N. Nazhat (2018). Functionalization Of Silk Fibroin Through Anionic Fibroin Derived Polypeptides. Biomedical materials (Bristol, England) vol. 14,1 015006. 9 Nov. 2018, doi:10.1088/1748-605X/aae745

N. Alejandre-Alba, R. Cutierrez-Contreras, Carlos Dorronsoro, S. Marcos (2018). Intraocular Photobonding To Enable Accommodating Intraocular Lens Function. Translational vision science & technology vol. 7,5 27. 11 Oct. 2018, doi:10.1167/tvst.7.5.27

R. Sigwadi, F. Nemavhola, M. Dhlamini, T. Mokrani (2018). Mechanical Strength Of Nafion®/Zro2 Nano-Composite Membrane. International Journal of Manufacturing, Materials, and Mechanical Engineering. 8. 54-65. 10.4018/IJMMME.2018010104.

X. Wang, J.A. Muniz-Lerma, O. Sanchez-Mata, M.A. Shandiz, M. Brochu (2018). Microstructure And Mechanical Properties Of Stainless Steel 316l Vertical Struts Manufactured By Laser Powder Bed Fusion Process. Materials Science and Engineering: A, Volume 736, 2018, Pages 27-40, ISSN 0921-5093, https://doi.org/10.1016/j.msea.2018.08.069.

K. Jahan, M. Mekhail, M. Tabrizian (2018). One-Step Fabrication Of Apatite-Chitosan Scaffold As A Potential Injectable Construct For Bone Tissue Engineering. Carbohydrate polymers vol. 203 (2019): 60-70. doi:10.1016/j.carbpol.2018.09.017

W. Zhu, K.R. Tringale, S.A. Woller, S. You, S. Johnson, H. Shen, J. Schimelman, M. Whitney, J. Steinauer, W. Xu, T.L. Yaksh, Q.T. Nguyen, S.Chen (2018). Rapid Continuous 3d Printing Of Customizable Peripheral Nerve Guidance Conduits. Materials today (Kidlington, England) vol. 21,9 (2018): 951-959. doi:10.1016/j.mattod.2018.04.001

B. Patel, Z. Xu, C. Pinnock, L. S.  Kabbani, M. T. Lam (2018). Self-Assembled Collagen-Fibrin Hydrogel Reinforces Tissue Engineered Adventitia Vessels Seeded With Human Fibroblasts. Scientific reports vol. 8,1 3294. 19 Feb. 2018, doi:10.1038/s41598-018-21681-7

C.P. Kenaley, A. Sanin, J. Ackerman, J. Yoo, A. Alberts (2018). Skin Stiffness In Ray-Finned Fishes: Contrasting Material Properties Between Species And Body Regions. Journal of morphology vol. 279,10 (2018): 1419-1430. doi:10.1002/jmor.20877

Tavakoli, J., Amin, D.B., Freeman, B.J. and Costi, J.J. (2018). The biomechanics of the inter-lamellar matrix and the lamellae during progression to lumbar disc herniation: which is the weakest structure? Annals of biomedical engineering vol. 46,9 (2018): 1280-1291. doi:10.1007/s10439-018-2056-0

Sigwadi, R., Dhlamini, M.S., Mokrani, T., Nonjola, P. and Nemavhola, F (2018). The impact of zirconia nano-rods on the methanol permeability and conductivity of Nafion®-ZrO2 nano-composite membrane. International Journal of Microstructure and Materials Properties. 13. 381. 10.1504/IJMMP.2018.097780.

W. Zhu, S-H. Pyo, S. You, C. Yu, J. Alido, J. Liu, Y. Leong, S. Chen (2018). Three-Dimensional Printing Of Bisphenol A-Free Polycarbonates. ACS applied materials & interfaces vol. 10,6 (2018): 5331-5339. doi:10.1021/acsami.7b18312

A. Kumar, H. Saghlatoon, T-G. La, M. M. Honari, H. Charaya, H.A. Damis, R. Mirzavand, P. Mousavi, H-J. Chung (2017). A Highly Deformable Conducting Traces For Printed Antennas And Interconnects: Silver/Fluoropolymer Composite Amalgamated By Triethanolamine. Flex. Print. Electron. 2 045001

Fischinger, I., Seiler, T.G., Frueh, B.E. and Miller, M. (2017). Biomechanical properties after corneal crosslinking using riboflavin in dextran solution or in hydroxy propyl methyl cellulose. Invest. Ophthalmol. Vis. Sci. 2017;58(8):4315

Lee, P.S., Eckert, H., Hess, R., Gelinsky, M., Rancourt, D., Krawetz, R., Cuniberti, G. and Scharnweber, D. (2017). Developing a customized perfusion bioreactor prototype with controlled positional variability in oxygen partial pressure for bone and cartilage tissue engineering. Tissue engineering. Part C, Methods vol. 23,5 (2017): 286-297. doi:10.1089/ten.TEC.2016.0244

X. Li, M.M. Honari, Y. Fu, A. Kumar, H. Saghlatoon (2017). Self-Reinforcing Graphene Coatings On 3d Printed Elastomers For Flexible Radio Frequency Antennas And Strain Sensors. Flex. Print. Electron. 2 035001

B. M. Kasukonis, J.T. Kim, T.A. Washington, J.C. Wolchok (2016). Development Of An Infusion Bioreactor For The Accelerated Preparation Of Decellularized Skeletal Muscle Scaffolds. Biotechnology progress vol. 32,3 (2016): 745-55. doi:10.1002/btpr.2257

N. Bekesi, C. Dorronsoro, A. de la Hoz, S. Marcos (2016). Material Properties From Air Puff Corneal Deformation By Numerical Simulations On Model Corneas. PloS one vol. 11,10 e0165669. 28 Oct. 2016, doi:10.1371/journal.pone.0165669

X. Liu, J. Cleary, G.K. German (2016). The Global Mechanical Properties And Multi-Scale Failure Mechanics Of Heterogeneous Human Stratum Corneum. Acta biomaterialia vol. 43 (2016): 78-87. doi:10.1016/j.actbio.2016.07.028

S.A. Hurd, N.M. Bhatti, A.M. Walker, B.M. Kasukonis, J.C. Wolchok (2015). Development Of A Biological Scaffold Engineered Using The Extracellular Matrix Secreted By Skeletal Muscle Cells. Biomaterials vol. 49 (2015): 9-17. doi:10.1016/j.biomaterials.2015.01.027

T.G. Seiler, I. Fischinger, T. Senfft, G. Schmidinger, T. Seiler (2014). Intrastromal Application Of Riboflavin For Corneal Crosslinking. Investigative ophthalmology & visual science vol. 55,7 4261-5. 10 Jun. 2014, doi:10.1167/iovs.14-14021

RelatedItems