General Purpose Probes (Type T Thermocouple)

A range of T Type thermocouple probes with options for immersion, surface or for air and gas temperature measurement.

Options

	HT-1 ''Workhorse'' General Purpose Probe - designed for temperature measurement of liquids, gases and semi-solids. Plastic handle with straight 3'' stainless shaft. Not good for surface temperatures. Maximum temperature 400°C, Time constant 0.5 Seconds. 5 foot lead. Not isolated.
	HT-2 ''Workhorse'' General Purpose Probe - designed for temperature measurement of liquids, gases and semi-solids. Plastic handle with straight 9'' stainless shaft. Not good for surface temperatures. Maximum temperature 400°C, Time constant 0.5 Seconds. 5 foot lead. Not isolated.
	BT-1 General Purpose Probe - Probably our best general purpose probe designed for temperature measurement of solids, liquids, gases and semi-solids. Welded stainless-stell shaft, plastic handle. Tip is .028'' diameter bent at right angle to probe to facilitate accurate surface measurements. Immersible. Maximum temperature 240°C, Time constant 0.15 Seconds. 5 foot lead. Not isolated.
	DPT-12 Immersion Probe for Liquids - 12'' #304 stainless steel welded shaft. Wooden Handle. Diameter is .3/16'' diameter. Immersible. Maximum temperature 350°C, Time constant 2 Seconds. 5 foot lead. Not isolated. DPT-24 Immersion Probe for Liquids - 24'' #304 stainless steel welded shaft. Wooden Handle. Diameter is .3/16'' diameter. Immersible. Maximum temperature 350°C, Time constant 2 Seconds. 5 foot lead. Not isolated.
	GT-1 Air and Gas Probe - 24'' #304 stainless steel shaft. Wooden Handle. For instant readings of temperature gradients in environmental chambers, freezer boxes, etc. Diameter is .3/16'' diameter. Immersible. Maximum temperature 200°C, Time constant Seconds. 5 foot lead. Not isolated.
	PT-6 Sensor Six-Pack - For multi-point temperature measurements. Inexpensive, Flexible. Welded sensor beads, tough kapton insulation. Diameter is .029''. Maximum temperature 350°C, Time constant 0.01 Seconds. 5 foot lead. Not isolated.

Time constant is defined as the time  required to reach 63% of final temperature  in liquid.  An accurate reading is obtained  when the reading stops changing, typically  5-10 time constants.

Maximum Temperature refers to intermit tent use of a probe. When probe is used for continuous measurements, maximum temperature should bereduced by 25%.

Choose Quantity

HT-1

General Purpose Type T Thermocouple Probe designed for temperature measurement of liquids, gases and semi-solids. Plastic handle with straight 3'' stainless shaft.

• 0.059" Tip diameter, 3" stainless steel probe length
• Temperature range -100°C to 400°C
• 0.5s time constant
• Not isolated
• 5' lead length

Choose Quantity

HT-2

General Purpose Type T Thermocouple Probe designed for temperature measurement of liquids, gases and semi-solids. Plastic handle with straight 9'' stainless shaft.

• 0.059" Tip diameter, 9" stainless steel probe length
• Temperature range -100°C to 400°C
• 0.5s time constant
• Not isolated
• 5' lead length

Choose Quantity

BT-1

General Purpose Type T Thermocouple Probe designed for surface temperature measurement of solids, liquids, gases and semi-solids. Welded stainless-stell shaft, plastic handle. Tip is bent at right angles to facilitate accurate surface measurements.

• 0.028" Tip diameter, bent at right angles, 4" proble length
• ±0.1°C in the physiological range
• Temperature range -50°C to 240°C
• 0.15s time constant
• Not isolated
• 5' lead length